1. Support
  2. Flash and light triggering

Using Manual lighting control with the Raven

To begin, make sure the zone you intend to use has the power level displayed in that particular zone. If that zone is blank, tap on the screen or press the button for that zone for 1 second. Once you see a power value displayed, you are ready to set that zone to Manual

  • To begin quickly press the button or tap the screen for the zone, or zones, you want to use for manual control and the letter will become highlighted
  • Now tap Center-1 in the center of the screen while the zone, or zones, are highlighted
  • Here you will tap on ButtonActiveMAN to switch that zone, or zones, to manual control.  Then you will be returned to the Zone Control Display and can now make changes to the power levels.